Christie Roadie 25k 3-Chip 2k Dlp 25, 000 Lumen Projector

Detailed Product Description
Digital Light Processing 3-chip 1.25" Darkchip2 DMDResolution 2048 x 1080Brightness 8,000 - 25,000 ANSI lumens (+/-10%)Contrast Ratio High Brightness lens: 1600:1 on/offHigh Contrast lens: 1800:1 on/offANSI Contrast, both lenses: 650:1High Contrast optional aperture: 2800:1Input Line Voltage Ballast: 3-phase 200-230 VAC +/- 10% @ 50/60 Hz (max 24A per phase)3-phase 380-415 VAC +/- 10% @ 50/60 Hz (max 12.5A per phase)Projection Head: Single-phase 200-240 VAC +/- 10% @ 50/60 HzColor Processing 10-bit digital processingScan Rates Horizontal - 15 kHz to 120 kHzVertical - 23.97 Hz to 150 HzExtraction Fan 8"exhaust port located at the projection head for extraction of hot air; extraction fan is required (min 600 cfm at projector)Video Decoder Built-in multi-standard video decoder (NTSC, NTSC4.43, PAL, PALM, PAL N, PAL 60, SECAM)Lamp Xenon bubble lamp, field replaceableHigh brightness: CDXL60, CDXL45, CDXL30 and CDXL20Standard lamps: CXL60, CXL45, CXL30Lamp life 500 - 1000 hours or more (depending on wattage lamp used, power level)Power Supply Separate 7kW low-ripple switch mode lamp ballastInputs, Control and Networking RGBHV/YPbPr: 5 BNCDVI-I: digital/analog RGB/YPbPrDual SD/HD-SDI interface module1 composite video and 1 S-Video2 RS-232 ports and 3 RS-422 portsOn-board ChristieNET connectivity (RJ-45)IR remote, built-in backlit keypad/status displayLens Mount Manual operation for focus, zoom and horizontal and vertical offsetStandard Accessories IR keypad w/batteriesLine cordDual SD/HD-SDI moduleUser manualOptional Accessories Extraction Fan Kit (mandatory)High Brightness lenses: 1:1, 1.25-1.45:1, 1.45-1.8:1, 1.8-.2.4:1, 2.2-3.0:1, 3.0-4.3:1, 4.3-6.0:1, 5.5-8.5:1High Contrast lenses: 1.25:1.45:1, 1.45-1.8:1, 1.8-2.4:1, 2.2-3.0:1, 3.0-4.3:1, 4.3-6.0:1, 5.5-8.5:1FredFrame (rigging frame)1.26X Anamorphic LensAnamorphic lens mountChristieTWIST Image Warping and Edge-Blending moduleDual SD/HD-SDI (additional module), DVI and legacy interface modulesWired remote controlRemote IR sensorEthernet, RS-232 and RS-422 cablesService manualKoRE 10-bit librarianStacking offset extractor ductWeight Projection head (approx): 260 lb (118.2 kg)Ballast (approx): 110 lb (50 kg)Optional FredFrame (approx): 105.4 lb (47.9kg) with Fork Lift Tubes and CastorsDimensions (W x L x H) Projection Head (approx): 25.6" x 49.0" x 20.5" (650mm x 1250mm x 520mm)Ballast (approx): 21.3" x 17.3" x 20.9" (540mm x 440mm x 530mm)Optional FredFrame (approx): 33.5" x 54.9" x 25.7" (851mm x 1395mm x 653mm)Regulatory Approvals UL/CSA/IEC 60950 (3rd edition)FCC Class A, CE, CCC (pending)This product conforms to all relevant European directives, standards, safety, health and environmental concerns